FAG's 825004010 Ball Joint Wheel Suspension is designed to provide optimal performance in various driving conditions, ensuring stable and controlled vehicle handling.
Ball joints are spherical bearings connecting the control arms to the steering knuckles, allowing for suspension movement and steering articulation. Commonly used in both upper and lower control arms of independent suspension systems, they facilitate vertical and rotational movement while maintaining load-bearing capacity. Construction typically involves heat-treated steel forging with a hardened ball stud and a polymeric or metallic socket. Integral boots protect against contamination and maintain lubrication, and pre-loaded designs minimize play and enhance handling precision. Failure modes often include boot degradation leading to corrosion and excessive play, requiring replacement to maintain suspension geometry and steering control.
Similar Products
Additional in-stock FAG products matching "Ball Joint" are available under these MPN numbers: 825002010 (0.429 kg; 73 x 110 x 110 mm), 825002810 (0.383 kg; 73 x 110 x 110 mm), 825003710 (0.262 kg; 73 x 110 x 110 mm), 825003910 (0.421 kg; 73 x 110 x 110 mm), 825004310 (0.391 kg; 62 x 92 x 113 mm), 825004510 (0.504 kg; 73 x 110 x 110 mm), 825004610 (0.503 kg; 72 x 99 x 189 mm), 825004710 (0.554 kg; 62 x 92 x 113 mm), 825005210 (0.44 kg; 73 x 110 x 110 mm), 825005310 (0.513 kg; 62 x 92 x 113 mm), etc. Please make sure you choose the MPN that matches your application.