840016910 FAG Axial Joint

The Steering Axial Joint from FAG (MPN: 840016910) is sourced from Turkey and has supplier-listed dimensions of 74 x 114 x 464 mm. It is typically used within the Suspension & Steering > Arms & Joints > Ball Joint category of automotive replacement parts. Dimensions are provided by the supplier and may include packaging dimensions. Ball joints are spherical bearings connecting the control arms to the steering knuckles, allowing for suspension movement and steering articulation. Commonly used in both upper and lower control arms of independent suspension systems, they facilitate vertical and rotational movement while maintaining load-bearing capacity. Construction typically involves heat-treated steel forging with a hardened ball stud and a polymeric or metallic socket. Integral boots protect against contamination and maintain lubrication, and pre-loaded designs minimize play and enhance handling precision. Failure modes often include boot degradation leading to corrosion and excessive play, requiring replacement to maintain suspension geometry and steering control.

Similar Products

Similar FAG products matching "Axial Joint" currently in stock can also be found under these MPN numbers: 840005810 (0.449 kg; 43 x 98 x 256 mm), 840005910 (0.58 kg; 43 x 98 x 256 mm), 840006910 (0.742 kg; 74 x 114 x 464 mm), 840007010 (0.59 kg; 76 x 125 x 305 mm), 840007310 (0.512 kg; 43 x 98 x 256 mm), 840007510 (0.55 kg; 43 x 98 x 256 mm), 840007710 (0.684 kg; 74 x 114 x 464 mm), 840007810 (0.678 kg; 43 x 98 x 256 mm), 840007910 (0.67 kg; 74 x 114 x 464 mm), 840008010 (0.833 kg; 74 x 114 x 464 mm), etc. Please make sure you choose the MPN that matches your application.