840109710 FAG Tie Rod End

The Tie Rod End Steering from FAG (MPN: 840109710) is sourced from Turkey and has supplier-listed dimensions of 66 x 98 x 337 mm. It is typically used within the Suspension & Steering > Arms & Joints > Ball Joint category of automotive replacement parts. Dimensions are provided by the supplier and may include packaging dimensions. Ball joints are spherical bearings connecting the control arms to the steering knuckles, allowing for suspension movement and steering articulation. Commonly used in both upper and lower control arms of independent suspension systems, they facilitate vertical and rotational movement while maintaining load-bearing capacity. Construction typically involves heat-treated steel forging with a hardened ball stud and a polymeric or metallic socket. Integral boots protect against contamination and maintain lubrication, and pre-loaded designs minimize play and enhance handling precision. Failure modes often include boot degradation leading to corrosion and excessive play, requiring replacement to maintain suspension geometry and steering control.

Similar Products

Additional in-stock FAG products matching "Tie Rod End" are available under these MPN numbers: 840059210 (0.486 kg; 73 x 110 x 110 mm), 840059310 (0.753 kg; 72 x 99 x 189 mm), 840060110 (0.661 kg; 66 x 98 x 337 mm), 840060210 (0.674 kg; 66 x 98 x 337 mm), 840060610 (0.713 kg; 204 x 109 x 109 mm), 840060710 (0.719 kg; 204 x 109 x 109 mm), 840061610 (0.409 kg; 73 x 110 x 110 mm), 840063110 (0.403 kg; 62 x 92 x 113 mm), 840063310 (0.458 kg; 73 x 110 x 110 mm), 840063610 (0.778 kg; 76 x 125 x 305 mm), etc. Please make sure you choose the MPN that matches your application.