35352 Febi Angle Ball Joint

The Hydraulic Steering Cylinder Ball Joint from Febi (MPN: 35352) is sourced from Turkey and has supplier-listed dimensions of 140 x 90 x 190 mm. It is typically used within the Suspension & Steering > Arms & Joints > Ball Joint category of automotive replacement parts. Dimensions are provided by the supplier and may include packaging dimensions. Ball joints are spherical bearings connecting the control arms to the steering knuckles, allowing for suspension movement and steering articulation. Commonly used in both upper and lower control arms of independent suspension systems, they facilitate vertical and rotational movement while maintaining load-bearing capacity. Construction typically involves heat-treated steel forging with a hardened ball stud and a polymeric or metallic socket. Integral boots protect against contamination and maintain lubrication, and pre-loaded designs minimize play and enhance handling precision. Failure modes often include boot degradation leading to corrosion and excessive play, requiring replacement to maintain suspension geometry and steering control.

Similar Products

You may also find these in-stock Febi products matching "Angle Ball Joint" under the following MPN numbers: 07039 (DIN - ISO: 71802; Internal Thread: M5 x 1; Outer Diameter: 8), 07041 (DIN - ISO: 71802; Internal Thread: M6 x 1; Outer Diameter: 10), 07043 (DIN - ISO: 71802; Internal Thread: M8 x 1; Outer Diameter: 13), 07045 (DIN - ISO: 71802; Internal Thread: M10 x 1; Outer Diameter: 16), 07050 (DIN - ISO: 71802; Internal Thread: M6 x 1; Outside Thread: M6 x 1), 07051 (DIN - ISO: 71802; Internal Thread: M8 x 1; Outside Thread: M8 x 1), 1000390 (1.648 kg; 70 x 120 x 210 mm), 101706 (Internal Thread: M30 x 1, 5 RHT; Outside Thread: M30 x 1, 5 RHT), 102283 (For Vehicles with Emission Standard: Euro 6 (and others); Internal Thread: M26 x 1, 5 RHT; Outside Thread: M20 x 1, 5), 102434 (For Vehicles with Emission Standard: Euro 6 (and others); Internal Thread: M26 x 1, 5; Outside Thread: M20 x 1, 5), etc. Please make sure you choose the MPN that matches your application.