818035310 FAG Stabilizer Link

The Stabilizer Rod from FAG (MPN: 818035310) is sourced from Taiwan and has supplier-listed dimensions of 73 x 110 x 110 mm. It is typically used within the Suspension & Steering > Strut & Spring > Torsion Bar category of automotive replacement parts. Dimensions are provided by the supplier and may include packaging dimensions. Torsion bars are longitudinal spring elements utilizing torsional resistance to provide suspension support, commonly found in independent front suspensions of trucks and some rear suspensions. These heat-treated alloy steel bars are anchored at both ends of the vehicle chassis and twisted by suspension movement, offering a variable spring rate proportional to the degree of twist. Adjustment is typically achieved via eccentric locknuts modifying preload. Unlike coil springs, torsion bars offer increased ground clearance and design packaging flexibility. Failure modes include cracking due to fatigue or corrosion, often presenting as noticeable ride degradation or suspension component misalignment.

Similar Products

Other available FAG products matching "Stabilizer Link" include these MPN numbers: 818002110 (0.255 kg; 73 x 110 x 110 mm), 818002310 (0.363 kg; 72 x 99 x 189 mm), 818003510 (0.304 kg; 62 x 92 x 113 mm), 818004110 (0.3 kg; 73 x 110 x 110 mm), 818004210 (0.299 kg; 73 x 110 x 110 mm), 818004410 (0.398 kg; 62 x 92 x 113 mm), 818004610 (0.498 kg; 74 x 114 x 464 mm), 818005310 (0.45 kg; 76 x 125 x 305 mm), 818005410 (0.321 kg; 73 x 110 x 110 mm), 818005510 (0.444 kg; 66 x 98 x 337 mm), etc. Please make sure you choose the MPN that matches your application.