819017210 FAG Bushing

The Stabilizer Mount from FAG (MPN: 819017210) is sourced from Italy and has supplier-listed dimensions of 30 x 42 x 43 mm. It is typically used within the Suspension & Steering > Strut & Spring > Torsion Bar category of automotive replacement parts. Dimensions are provided by the supplier and may include packaging dimensions. Torsion bars are longitudinal spring elements utilizing torsional resistance to provide suspension support, commonly found in independent front suspensions of trucks and some rear suspensions. These heat-treated alloy steel bars are anchored at both ends of the vehicle chassis and twisted by suspension movement, offering a variable spring rate proportional to the degree of twist. Adjustment is typically achieved via eccentric locknuts modifying preload. Unlike coil springs, torsion bars offer increased ground clearance and design packaging flexibility. Failure modes include cracking due to fatigue or corrosion, often presenting as noticeable ride degradation or suspension component misalignment.

Similar Products

Other available FAG products matching "Bushing" include these MPN numbers: 819000210 (0.153 kg; 62 x 92 x 113 mm), 819000310 (0.07 kg; 45 x 57 x 57 mm), 819000510 (0.066 kg; 43 x 87 x 87 mm), 819000610 (0.059 kg; 44 x 57 x 57 mm), 819000710 (0.154 kg; 62 x 92 x 113 mm), 819001210 (0.05 kg; 43 x 87 x 87 mm), 819001310 (0.043 kg; 37 x 42 x 45 mm), 819001410 (0.122 kg; 62 x 92 x 113 mm), 819001710 (0.054 kg; 43 x 45 x 52 mm), 819002010 (0.023 kg; 24 x 35 x 35 mm), etc. Please make sure you choose the MPN that matches your application.