825013010 FAG Ball Joint

The Ball Joint Wheel Suspension from FAG (MPN: 825013010) is sourced from Turkey and has supplier-listed dimensions of 73 x 110 x 110 mm. It is typically used within the Suspension & Steering > Arms & Joints > Ball Joint category of automotive replacement parts. Dimensions are provided by the supplier and may include packaging dimensions. Ball joints are spherical bearings connecting the control arms to the steering knuckles, allowing for suspension movement and steering articulation. Commonly used in both upper and lower control arms of independent suspension systems, they facilitate vertical and rotational movement while maintaining load-bearing capacity. Construction typically involves heat-treated steel forging with a hardened ball stud and a polymeric or metallic socket. Integral boots protect against contamination and maintain lubrication, and pre-loaded designs minimize play and enhance handling precision. Failure modes often include boot degradation leading to corrosion and excessive play, requiring replacement to maintain suspension geometry and steering control.

Similar Products

You may also find these in-stock FAG products matching "Ball Joint" under the following MPN numbers: 825002010 (0.429 kg; 73 x 110 x 110 mm), 825002810 (0.383 kg; 73 x 110 x 110 mm), 825003710 (0.262 kg; 73 x 110 x 110 mm), 825003910 (0.421 kg; 73 x 110 x 110 mm), 825004010 (0.45 kg; 73 x 110 x 110 mm), 825004310 (0.391 kg; 62 x 92 x 113 mm), 825004510 (0.504 kg; 73 x 110 x 110 mm), 825004610 (0.503 kg; 72 x 99 x 189 mm), 825004710 (0.554 kg; 62 x 92 x 113 mm), 825005210 (0.44 kg; 73 x 110 x 110 mm), etc. Please make sure you choose the MPN that matches your application.